Latest Guides To Renting A Diesel Generator In Singapore (2021)

3 Mins read

A large quantity of energy is necessary on a construction site, both physically and metaphorically. A connection to a construction site is not always available or appropriate for the heavy equipment used on the job site. A generator set can be used to provide a solution. There are many types of generator sets on the market, and it is important that you select the suitable generator for the appropriate purpose. What should you check for when acquiring or renting a generator?

Know What You Are Using It For

The type and amount of load connected to the generator are crucial factors to consider when selecting the best diesel generator for your job site. What equipment, such as a tower crane, is on-site, what pumps must be powered, and is the generator only for small tools?

It is crucial to calculate how much electricity you will require. For example, a 100 kVA power group can create around 80 kW of electricity. Although smaller and larger units are available on the market, groups of 10 to 150 kVA are the most commonly used in the construction industry. The largest rental units we can install, for example, have a capacity of 1400 kVA, or 1120 kW, and are ready for use right away. These types of generators are critical in industrial environments, such as an industrial bakery, a distribution centre, or a data centre with cooling.

Always Plan Ahead Before Renting A Generator

Will the generator will end up in an industrial place or in the heart of a city? It affects the type of generator set that is most suited to your project.

While there are strict noise rules are in urban areas, they are often not applied in industrial settings. The same is true if the generator set has to function at night. The generator’s size is proportional to how silent it is. As a result, make sure you know how much space you have for the generator.

A Backup Is Necessary In Case Of Unexpected Situation

For every application, there is a generator available. Do you need a generator for a production environment, a food company, a work site or an event, or do you require it as a last-minute solution? If so, does the generator set just get utilized during the day or does it also get used at night?

while a brief power outage during an operation is unavoidable, it is preferable to use a redundant installation, also known as a TWIN installation. This is true for major events, television records, and critical consumer supply, such as in hospitals or during deep excavation. As a result, if one of the two generators installed fails, a backup generator is always available. A stationary generator is frequently used in a variety of applications where current continuity must be ensured in the event of a power system failure. It is also possible in this situation to rent a temporary generator to assist with the situation.

The Capability Of A Generator

The amount of power that a generator set can produce is the most important selection criterion. Avoid confusing motor consumption (measured in W or kW) with generator power, which is referred to in this context as “output power” (indicated in VA or kVA).

Only the latter is significant because it demonstrates what the group is truly capable of providing in order to run the tools to which you wish to connect. On rare occasions, two output powers are specified: one for normal operation and one for maximum operation.

When the power is increased by 10 to 25%, the maximum power is only available for a short period of time, but it allows the diesel generator set to survive the necessary over current when the engines are first started.

The Following Are The Factors For You To Choose A Portable Generator

  • The amount of electricity needed to start a generator set.
  • Manual starting of a generator set’s engine using a launcher is the traditional method of getting the engine running.
  • According to the electricity available and your needs, a generator set with an electric start may be more appropriate in certain cases.
  • Generators are not designed to run at maximum capacity all of the time.
  • Deduct a “power reserve” from one-third of the nominal power of the group in order to arrive at the real amount of power available.

Deduct a “power reserve” from one-third of the nominal power of the group in order to arrive at the real amount of power available.